Knives & Accessories

KNIFE:HNKL#31070-081:4* -3"PAR

$88.00

$74.99

Quantity Available

In Stock

Part Number

F24201616

ZWILLING J.A. HENCKELS
FOUR STAR SERIES
PARING KNIFE: 3"
HENCKEL #31070-080
*************
Relatively small, lightweight, versatile knife with a slim blade with centre tip and straight cutting edge. Peeling, cutting, cleaning and decoratively shaping fruit and vegetables and preparing meat.

HNCKL#38640-131 TRAD TOMATO KNFE

$60.00

$59.99

Quantity Available

In Stock

Part Number

F24202416

ZWILLING Tradition
-> special formula steel
-> 57 degree Rockwell
-> FRIODUR hardened
-> Full Tang
-> 3-rivet synthetic resin handle with embedded logo
-> made in Europe (Spain)

HNCKL#38640-161 TRAD UTILTY KNFE

$85.00

$74.99

Quantity Available

In Stock

Part Number

F24202420

ZWILLING Tradition
-> special formula steel
-> 57 degree Rockwell
-> FRIODUR hardened
-> Full Tang
-> 3-rivet synthetic resin handle with embedded logo
-> made in Europe (Spain)

HNCKL#38640-201 TRAD SLCNG KNFE

$85.00

$74.99

Quantity Available

In Stock

Part Number

F24202430

ZWILLING Tradition
-> special formula steel
-> 57 degree Rockwell
-> FRIODUR hardened
-> Full Tang
-> 3-rivet synthetic resin handle with embedded logo
-> made in Europe (Spain)

HNCKL#38641-201 TRAD CHEFS KNFE

$125.00

$99.99

Quantity Available

In Stock

Part Number

F24202434

ZWILLING Tradition
-> special formula steel
-> 57 degree Rockwell
-> FRIODUR hardened
-> Full Tang
-> 3-rivet synthetic resin handle with embedded logo
-> made in Europe (Spain)

HNCKL#38644-141 TRAD BNG KNIFE

$80.00

$74.99

Quantity Available

In Stock

Part Number

F24202448

ZWILLING Tradition
-> special formula steel
-> 57 degree Rockwell
-> FRIODUR hardened
-> Full Tang
-> 3-rivet synthetic resin handle with embedded logo
-> made in Europe (Spain)

HNCKL#38646-201 TRAD BREAD KNIFE

$100.00

$89.99

Quantity Available

In Stock

Part Number

F24202458

ZWILLING Tradition
-> special formula steel
-> 57 degree Rockwell
-> FRIODUR hardened
-> Full Tang
-> 3-rivet synthetic resin handle with embedded logo
-> made in Europe (Spain)

11SLT BLOCK:CHARCOAL #35006-105

$85.00

$84.99

Quantity Available

In Stock

Part Number

F24203906

10 SLOT KNIFE BLOCK
#35100-660

11SLT BLOCK:NATURAL #35006-101

$84.99

Quantity Available

In Stock

Part Number

F24203908

HENCKEL TWIN SERIES
11 SLOT NATURAL BLOCK (HENCKEL #35006-101)
**********************
-> Measuring 10-1/2 by 8-1/4 by 4-3/4 inches overall--with a slightly smaller footprint--this classically designed knife storage block
comfortably
houses ten slots of varying sizes. Safely tuck away small paring knives alongside larger chef0s and bread knives to keep cutlery centralized and protected from drawer damage. Resting atop slip-resistant rubber feet and constructed of solid red oak; this countertop item offers a trio of 1-inch slots for smaller scale blades, and then progresses through five slots of increasingly larger size for the rest of the cutlery collection. The top right-hand corner features a 1/2-inch square slot specifically designed to hold a sharpening steel while kitchen shears fit comfortably in a larger square up front. Although designed by renowned blade manufacturer Henckels, this block comfortably houses blades of any make. Made in Germany **********************
-> ZWILLING J.A. HENCKELS0 TWIN Collection shows new ways in design and function. Optimum comfort and feel combined with outstanding design in matt-finished stainless steel, makes these ergonomically shaped knives a pleasure to use. On top of that, finest quality through individually hand made pieces match the exclusive appearance and ergonomic design

-> Twin Collection offers the perfect "designer tool" for each and every occasion, at the buffet, at the well-set table or in the kitchen: cheese knives with five different blade shapes for different cheese textures, the vast array of accessories for tea & coffee or the kitchen, knives which supply the right cut for vegetables, meat, bread and fish. **********************
HENCKEL #35006-101

BLOCK W/CUTTING BOARD 35574-100

$200.00

$99.99

Quantity Available

In Stock

Part Number

F24203919

HENCKEL KNIFE BLOCK WITH CUTTING BOARD
-35574-100

KNIFE RACK:MAGNET#32621-450 BLK

$65.00

$59.99

Quantity Available

In Stock

Part Number

F24203922

HENCKEL RACK
MAGNETIC KNIFE BAR: 17.5-in. (HENCKEL #32621-450)
******************
This sleek, compact designed magnet bar is handsome and efficient. A permanent magnetic quality grips metal objects and holds them in place. Mounts easily to most surfaces. Includes mounting hardware.

******************
-> Zwilling JA Henckels is the largest manufacturer of professional cutlery in Solingen. Their kitchen knives are famous worldwide for quality and design. Working with a JA Henckels knife is a real pleasure. The knives are very sharp and well balanced. Because of the hight quality stainless steel that is used and the Friodur ice-hardening. JA Henckels cutlery will stay sharp for a long time.

-> We recommend to maintain the edge of these knives with a sharpening steel. A regular sharpening is ideal for daily use and a ceramic sharpening steel is recommended for sharpening blunt knives. Don't believe manufacturers that say their knives will stay sharp for ever; you are better of using the same knives as many famous chef's do. If properly maintained, a JA Henckels knife will last for a life time, or longer
******************
HENCKEL #32621-450

KNIFE RACK:MAGNET#32622-300 ALUM

$65.00

$59.99

Quantity Available

In Stock

Part Number

F24203924

HENCKEL RACK
ALUMINUM MAGNETIC KNIFE BAR: 11.5-in. (HENCKEL #32622-300)

*******************
This aluminum knife holder mounts to the wall to keep your knives easily accessible, while still at a safe distance. It is perfect if you wish to save valuable counter space. It is 11.5-in. long and includes mounting hardware. Made of heavy duty aluminum.
*******************
-> Zwilling JA Henckels is the largest manufacturer of professional cutlery in Solingen. Their kitchen knives are famous worldwide for quality and design. Working with a JA Henckels knife is a real pleasure. The knives are very sharp and well balanced. Because of the hight quality stainless steel that is used and the Friodur ice-hardening. JA Henckels cutlery will stay sharp for a long time.

-> We recommend to maintain the edge of these knives with a sharpening steel. A regular sharpening is ideal for daily use and a ceramic sharpening steel is recommended for sharpening blunt knives. Don't believe manufacturers that say their knives will stay sharp for ever; you are better of using the same knives as many famous chef's do. If properly maintained, a JA Henckels knife will last for a life time, or longer.
*******************
HENCKEL #32622-300

KNIFE RACK:MAGNET#32622-450 ALUM

$75.00

$69.99

Quantity Available

In Stock

Part Number

F24203926

HENCKEL RACK
ALUMINUM MAGNETIC KNIFE BAR: 17.5-in. (HENCKEL #32622-450)

*******************
This aluminum knife holder mounts to the wall to keep your knives easily accessible, while still at a safe distance. It is perfect if you wish to save valuable counter space. It is 11.5-in. long and includes mounting hardware. Made of heavy duty aluminum.
*******************
-> Zwilling JA Henckels is the largest manufacturer of professional cutlery in Solingen. Their kitchen knives are famous worldwide for quality and design. Working with a JA Henckels knife is a real pleasure. The knives are very sharp and well balanced. Because of the hight quality stainless steel that is used and the Friodur ice-hardening. JA Henckels cutlery will stay sharp for a long time.

-> We recommend to maintain the edge of these knives with a sharpening steel. A regular sharpening is ideal for daily use and a ceramic sharpening steel is recommended for sharpening blunt knives. Don't believe manufacturers that say their knives will stay sharp for ever; you are better of using the same knives as many famous chef's do. If properly maintained, a JA Henckels knife will last for a life time, or longer.
*******************
HENCKEL #32622-450

HENCKEL TWINSELECT SHARPNR:DUO

$90.00

$54.99

Quantity Available

In Stock

Part Number

F24203992

HENCKEL TWINSHARP DUO
TWINSHARP SHARPENER: (HENCKEL #32601-000)
*******************
The Twinsharp is a quick and easy way to restore the edge of all your knives. The Twinsharp will regrind and hone the edge of the knife just as a professional sharpener would do. To use, pull the knife in the direction of the arrow 4 or 5 times using moderate force.
*******************
-> Size 6.25"
-> Materials Sharpening Module of Steel and Ceramic, ABS Plastic Casing
-> Manufacturer Henckels #32601-000
*******************
-> Zwilling JA Henckels is the largest manufacturer of professional cutlery in Solingen. Their kitchen knives are famous worldwide for quality and design. Working with a JA Henckels knife is a real pleasure. The knives are very sharp and well balanced. Because of the hight quality stainless steel that is used and the Friodur ice-hardening. JA Henckels cutlery will stay sharp for a long time.

-> We recommend to maintain the edge of these knives with a sharpening steel. A regular sharpening is ideal for daily use and a ceramic sharpening steel is recommended for sharpening blunt knives. Don't believe manufacturers that say their knives will stay sharp for ever; you are better of using the same knives as many famous chef's do. If properly maintained, a JA Henckels knife will last for a life time, or longer
*******************
HENCKEL #32601-000

ZWILLING SHARPPRO PULLSHRPNER

$95.00

$79.99

Quantity Available

In Stock

Part Number

F242039921

HENCKEL SHARPPRO DUO
TWINSHARP SHARPENER: 32595-000
*******************
The Twinsharp is a quick and easy way to restore the edge of all your knives. The Twinsharp will regrind and hone the edge of the knife just as a professional sharpener would do. To use, pull the knife in the direction of the arrow 4 or 5 times using moderate force.
*******************
-> Size 6.25"
-> Materials Sharpening Module of Steel and Ceramic, ABS Plastic Casing *******************
-> Zwilling JA Henckels is the largest manufacturer of professional cutlery in Solingen. Their kitchen knives are famous worldwide for quality and design. Working with a JA Henckels knife is a real pleasure. The knives are very sharp and well balanced. Because of the hight quality stainless steel that is used and the Friodur ice-hardening. JA Henckels cutlery will stay sharp for a long time.

-> We recommend to maintain the edge of these knives with a sharpening steel. A regular sharpening is ideal for daily use and a ceramic sharpening steel is recommended for sharpening blunt knives. Don't believe manufacturers that say their knives will stay sharp for ever; you are better of using the same knives as many famous chef's do. If properly maintained, a JA Henckels knife will last for a life time, or longer
*******************

VICTX CLSC: 8.75" BRD PSTRY KNF

$76.00

Quantity Available

In Stock

Part Number

F242040452

Swiss Classic Bread Pastry Knife

6.8633.22G

KNIFE:GLOBAL#GSF46:S/S-3"PEELING

$69.50

$59.99

Quantity Available

In Stock

Part Number

F24204283

GLOBAL
PEELING KNIFE
***************
For intricate tasks requiring precision and control. Used for paring, trimming, coring, and dicing fruits and vegetables.
***************
Size: 3 in.
Materials: Stainless steel
Cleaning and Care: Hand washing with mild cleanser recommended. (no dishwasher dry cycle)
Manufacturer: Global #GSF15
***************
Sharpening a Japanese knife
Japanese knives are sharpened using a much smaller angle than for instance European knives and are sometimes sharpened asymmetrical. Therefore these knives should never been sharpened on a sharpening device design for sharpening using a standard angle. Also we do not recommend sharpening these knives on a regular sharpening steel.
The ways to sharpen Japanese knives are:
- On a fine sharpening stone
- Using a ceramic or diamond coated sharpening steel.
- Using a water sharpener designed for Japanese knives
***************
The first GLOBAL knives were designed in 1985 by Komin Yamada whose remit was to develop a range of knives which was truly new and revolutionary, harnessing the best materials available and the most modern design concepts.
With an almost unlimited budget he was to fashion a series of kitchen knives which would appeal to the professional and amateur chef alike, be comfortable and easy to handle, and meet their most demanding requirements. GLOBAL knives are made from the finest stainless steel material. The blades utilize Molybdenum/vanadium stainless steel, ice tempered and hardened to Rockwell C56-58 degrees which holds a razor sharp edge longer than any other steel and resists rust, stains and corrosion.
Like most Japanese knives the blades of Global knives are thin and sharpened using a small - sometimes asymmetric - angle. This is what makes Japanese knives sharper than any other knives.
Another feature of Global knives is that the blades are sharpened all the way to the end. This makes it easy to maintain the edge on a sharpening stone.
***************
-> CROMOVA 18 stainless steel
-> Remains razor sharp longer than any other steel
-> Hygienic seamless construction eliminates food and dirt traps
-> Easily cleaned with soap and water; not dishwasher safe
-> Gift boxed

KNIFE:GLOBAL#GSF15:S/S-3"PEELING

$69.50

$59.99

Quantity Available

In Stock

Part Number

F242042831

GLOBAL
PEELING KNIFE
***************
For intricate tasks requiring precision and control. Used for paring, trimming, coring, and dicing fruits and vegetables.
***************
Size: 3 in.
Materials: Stainless steel
Cleaning and Care: Hand washing with mild cleanser recommended. (no dishwasher dry cycle)
Manufacturer: Global #GSF15
***************
Sharpening a Japanese knife
Japanese knives are sharpened using a much smaller angle than for instance European knives and are sometimes sharpened asymmetrical. Therefore these knives should never been sharpened on a sharpening device design for sharpening using a standard angle. Also we do not recommend sharpening these knives on a regular sharpening steel.
The ways to sharpen Japanese knives are:
- On a fine sharpening stone
- Using a ceramic or diamond coated sharpening steel.
- Using a water sharpener designed for Japanese knives
***************
The first GLOBAL knives were designed in 1985 by Komin Yamada whose remit was to develop a range of knives which was truly new and revolutionary, harnessing the best materials available and the most modern design concepts.
With an almost unlimited budget he was to fashion a series of kitchen knives which would appeal to the professional and amateur chef alike, be comfortable and easy to handle, and meet their most demanding requirements. GLOBAL knives are made from the finest stainless steel material. The blades utilize Molybdenum/vanadium stainless steel, ice tempered and hardened to Rockwell C56-58 degrees which holds a razor sharp edge longer than any other steel and resists rust, stains and corrosion.
Like most Japanese knives the blades of Global knives are thin and sharpened using a small - sometimes asymmetric - angle. This is what makes Japanese knives sharper than any other knives.
Another feature of Global knives is that the blades are sharpened all the way to the end. This makes it easy to maintain the edge on a sharpening stone.
***************
-> CROMOVA 18 stainless steel
-> Remains razor sharp longer than any other steel
-> Hygienic seamless construction eliminates food and dirt traps
-> Easily cleaned with soap and water; not dishwasher safe
-> Gift boxed

KNIFE:GLOBAL#GSF49:S/S-4.3"UTLTY

$93.00

$79.99

Quantity Available

In Stock

Part Number

F24204284

GLOBAL
UTILITY KNIFE
***************
Sandwich knives and other small utility knives for various functions in the kitchen.
***************
Size: 4 in.
Materials: Stainless steel
Cleaning and Care: Hand washing with mild cleanser recommended. (no dishwasher dry cycle)
Manufacturer: Global #GSF49
***************
Sharpening a Japanese knife
Japanese knives are sharpened using a much smaller angle than for instance European knives and are sometimes sharpened asymmetrical. Therefore these knives should never been sharpened on a sharpening device design for sharpening using a standard angle. Also we do not recommend sharpening these knives on a regular sharpening steel.
The ways to sharpen Japanese knives are:
- On a fine sharpening stone
- Using a ceramic or diamond coated sharpening steel.
- Using a water sharpener designed for Japanese knives
***************
The first GLOBAL knives were designed in 1985 by Komin Yamada whose remit was to develop a range of knives which was truly new and revolutionary, harnessing the best materials available and the most modern design concepts.
With an almost unlimited budget he was to fashion a series of kitchen knives which would appeal to the professional and amateur chef alike, be comfortable and easy to handle, and meet their most demanding requirements. GLOBAL knives are made from the finest stainless steel material. The blades utilize Molybdenum/vanadium stainless steel, ice tempered and hardened to Rockwell C56-58 degrees which holds a razor sharp edge longer than any other steel and resists rust, stains and corrosion.
Like most Japanese knives the blades of Global knives are thin and sharpened using a small - sometimes asymmetric - angle. This is what makes Japanese knives sharper than any other knives.
Another feature of Global knives is that the blades are sharpened all the way to the end. This makes it easy to maintain the edge on a sharpening stone.
***************
-> CROMOVA 18 stainless steel
-> Remains razor sharp longer than any other steel
-> Hygienic seamless construction eliminates food and dirt traps
-> Easily cleaned with soap and water; not dishwasher safe
-> Gift boxed

KNIFE:GLOBAL#GSF31:S/S 3"PEELING

$81.00

$69.99

Quantity Available

In Stock

Part Number

F24204287

GLOBAL
PEELING KNIFE LARGE HANDLE
***************
For intricate tasks requiring precision and control. Used for paring, trimming, coring, and dicing fruits and vegetables.
***************
Size: 6 in.
Materials: Stainless steel
Cleaning and Care: Hand washing with mild cleanser recommended. (no dishwasher dry cycle)
Manufacturer: Global #GSF31
***************
Sharpening a Japanese knife
Japanese knives are sharpened using a much smaller angle than for instance European knives and are sometimes sharpened asymmetrical. Therefore these knives should never been sharpened on a sharpening device design for sharpening using a standard angle. Also we do not recommend sharpening these knives on a regular sharpening steel.
The ways to sharpen Japanese knives are:
- On a fine sharpening stone
- Using a ceramic or diamond coated sharpening steel.
- Using a water sharpener designed for Japanese knives
***************
The first GLOBAL knives were designed in 1985 by Komin Yamada whose remit was to develop a range of knives which was truly new and revolutionary, harnessing the best materials available and the most modern design concepts.
With an almost unlimited budget he was to fashion a series of kitchen knives which would appeal to the professional and amateur chef alike, be comfortable and easy to handle, and meet their most demanding requirements. GLOBAL knives are made from the finest stainless steel material. The blades utilize Molybdenum/vanadium stainless steel, ice tempered and hardened to Rockwell C56-58 degrees which holds a razor sharp edge longer than any other steel and resists rust, stains and corrosion.
Like most Japanese knives the blades of Global knives are thin and sharpened using a small - sometimes asymmetric - angle. This is what makes Japanese knives sharper than any other knives.
Another feature of Global knives is that the blades are sharpened all the way to the end. This makes it easy to maintain the edge on a sharpening stone.
***************
-> CROMOVA 18 stainless steel
-> Remains razor sharp longer than any other steel
-> Hygienic seamless construction eliminates food and dirt traps
-> Easily cleaned with soap and water; not dishwasher safe
-> Gift boxed

KNIFE:GLOBAL#GSF16:S/S-3"PEELING

$66.00

$55.99

Quantity Available

In Stock

Part Number

F24204290

GLOBAL
PEELING KNIFE
***************
For intricate tasks requiring precision and control. Used for paring, trimming, coring, and dicing fruits and vegetables.
***************
Size: 3 in.
Materials: Stainless steel
Cleaning and Care: Hand washing with mild cleanser recommended. (no dishwasher dry cycle)
Manufacturer: Global #GSF16
***************
Sharpening a Japanese knife
Japanese knives are sharpened using a much smaller angle than for instance European knives and are sometimes sharpened asymmetrical. Therefore these knives should never been sharpened on a sharpening device design for sharpening using a standard angle. Also we do not recommend sharpening these knives on a regular sharpening steel.
The ways to sharpen Japanese knives are:
- On a fine sharpening stone
- Using a ceramic or diamond coated sharpening steel.
- Using a water sharpener designed for Japanese knives
***************
The first GLOBAL knives were designed in 1985 by Komin Yamada whose remit was to develop a range of knives which was truly new and revolutionary, harnessing the best materials available and the most modern design concepts.
With an almost unlimited budget he was to fashion a series of kitchen knives which would appeal to the professional and amateur chef alike, be comfortable and easy to handle, and meet their most demanding requirements. GLOBAL knives are made from the finest stainless steel material. The blades utilize Molybdenum/vanadium stainless steel, ice tempered and hardened to Rockwell C56-58 degrees which holds a razor sharp edge longer than any other steel and resists rust, stains and corrosion.
Like most Japanese knives the blades of Global knives are thin and sharpened using a small - sometimes asymmetric - angle. This is what makes Japanese knives sharper than any other knives.
Another feature of Global knives is that the blades are sharpened all the way to the end. This makes it easy to maintain the edge on a sharpening stone.
***************
-> CROMOVA 18 stainless steel
-> Remains razor sharp longer than any other steel
-> Hygienic seamless construction eliminates food and dirt traps
-> Easily cleaned with soap and water; not dishwasher safe
-> Gift boxed

WUST: IN DRAWER KNIFE TRAY #8000

$65.00

Quantity Available

In Stock

Part Number

F242052862

WUSTHOF: IN DRAWER KNIFE TRAY #8000

SHARP:WUST/CLSC#4473: STEEL 10"

$65.00

Quantity Available

In Stock

Part Number

F24205290

WUSTHOF
CLASSIC SERIES
HONING STEEL SHARPENER: 10"

----------------------------------
-> German Steel
-> Triple Rivet Handle

SHARP:WUST/CLSC#4463/23 9"STEEL

$55.00

Quantity Available

In Stock

Part Number

F24205291

WUSTHOF
CLASSIC SERIES
HONING STEEL SHARPENER: 9"
***************
Features:
-> Keeping knives sharp is easy if you sharpen them often on a W0STHOF sharpening steel.
-> 23 cm (9")
-> Beyond the legally required guarantee time, W0STHOF offers a very lenient unbureaucratic service covering material and workmanship defects.
**************